fbpx

Teac TN-400BT-SE Turntable Walnut

529

Call for availability

33/45/78 rpm, Bluetooth transmitter built-in, Phono & Line out (connectable to AUX inputs), MM, anti-skating system.

Call for availability

SEND EMAIL QUERY
SKU: TN400BTWA Categories: , Tags: , , , ,

Description

Analog Turntable with Bluetooth

Analog turntable with Bluetooth® aptX® transmitter that streams music from LP Records wirelessly

The TN-400BT is an analog turntable that also allows users to listen to LP records wirelessly via Bluetooth® headphones & speakers. A die-cast aluminium platter provides accurate rotational speed while an S-shaped static-balanced aluminum tone-arm provides accurate tracking. The built-in Phono EQ amplifier enables the TN-400BT to be connected to a conventional hi-fi amplifier or a micro hi-fi, while a universal-type headshell allows users to change cartridges with ease. 

A built-in Bluetooth® transmitter also lets users listen to LP records wirelessly with high-quality audio (thanks to the the aptX® and AAC codecs). For  convenience, a quality moving magnet-type cartridge comes pre-installed, so users can quickly start enjoying their records without a lengthy set-up procedure.

FEATURES AT-A-GLANCE

  • Robust high-density MDF plinth provides both vibration isolation and elegance
  • Available in a selection of contemporary matt finishes, or a natural walnut veneer
  • 3-speed belt-drive mechanism with aluminum die-cast platter (33-1/3, 45, 78 rpm)
  • Newly-developed low-resistance spindle for stable rotational speed
  • Static-balanced S-shaped tone-arm with universal-type headshell
  • Pre-installed MM-type AT95E cartridge from Audio-Technica
  • Built-in Phono EQ Amplifier with subsonic filter (off when THRU)
  • High-quality Bluetooth® aptX® wireless audio transmission
  • Floating-construction using decoupled feet provides high feedback resistance
  • Machined aluminium operation knobs and feet
  • Gold-plated RCA jacks (for LINE/PHONO output) and tone-arm contacts
  • GND terminal on rear panel
  • RCA audio cable with GND wiring included
TN400-WAL
TN400-WAL

Aluminum die-cast platter with 3-speed belt-drive 
A die-cast, high-inertia aluminum platter is driven by a high-torque DC motor via a durable rubber flat-belt, giving immensely stable playback at 33-1/3, 45 and 78 rpm speeds.

New low-resistance spindle 
A precisely-machined stainless steel spindle and durable brass bearing maintain accurate rotational speed, thanks to reduced friction.

New matt and natural walnut veneer finishes
The TN-400BT is available in four matt finishes, as well as a natural walnut veneer finish.

Built-in Phono EQ amplifier
The TN-400BT has an onboard Phono EQ amplifier that supports MM-type cartridges, allowing the deck to be connected to conventional amplifiers/micro systems that lack a dedicated turntable input. The Phono EQ amplifier employs a hi-fi quality NJM8080 op-amp chip (designed by JRC) which amplifies the tiny audio signal from the stylus with the minimum of distortion.

New subsonic filter for improved sound
By filtering out the frequencies below 18Hz the TN-400BT prevents excess LF signal levels being sent to amplifiers, presenting an easier electrical load to any connected speakers. This filter is particularly effective when playing back warped vinyl records which would otherwise induce undesirable woofer movement (The subsonic filter is off when Phono EQ is THRU).


S-shaped static-balanced tone-arm
The S-shaped, static-balanced aluminum tone-arm is equipped with a counterweight and anti-skating mechanism that allow an exact setting of balance as well as tracking pressure, ensuring accurate tracking during playback. A tone-arm lifter is also fitted for smooth lowering of the tone-arm onto records.

The tone-arm takes universal-type headshells so users can change cartridges with relative ease. In order to reduce signal losses between the tone-arm and the headshell, gold-plated contact points are employed, to help deliver an uncorrupted audio signal.

Bluetooth® wireless audio streaming with aptX® codec
The TN-400BT’s Bluetooth® wireless transmission system supports the higher quality aptX® and AAC codecs, as well as the conventional SBC codec. This means that even if users don’t have a hi-fi system, then can still enjoy truly high-quality vinyl replay via  Bluetooth®-equipped headphones or speakers.

Connecting the TN-400BT to Bluetooth® headphones or speakers is achieved very simply, at the touch of a button. A single-function pairing key and an associated LED indicator provide simple and clear confirmation of the connection status. 

Beautifully detailed
The TN-400BT brings elegance to the process of playing a record. The machined aluminum operation knobs ooze quality while the aluminum feet, attached to high-density MDF chassis via shock-absorbing rubber, provide a high resistance to feedback.

MM-type Cartridge from Audio-Technica 
The deck comes with an excellent, all-purpose MM cartridge, employing a lightweight aluminum cantilever, that helps deliver an accurate, highly musical standard of playback.

Additional information

Brand

Teac

Colour

Grey, Wood

Audio Features

, ,

Product Colours

Brown

Turntable Features

Bluetooth, Phono / Line-Out, USB Out

Title

Go to Top