Compact CW8 cube will add explosive bass frequencies to music and AV systems when tucked behind furniture on room boundaries.
Description
CW8
The new CW8 places all the power in the hands of installer and client. Engineered for control in operation, bass quality and concealment in-room, the compact CW8 cube will add explosive bass frequencies to music and AV systems when tucked behind furniture on room boundaries.
Technology
- Ultra-compact ‘cube’ shape designs
- Twin side-mounted ABRs for increased output and reduced distortion. Higher output than a sealed box and better control and zero air noise compared to a ported box
- High excursion woofers featuring signature C-CAM cone technology
- High-power Class-D amplifier delivering 400 watts
- DSP processing –all functions performed in the digital domain for precise control
- RS-232 for integration with system controllers
- SubConnect’ PC Applet for full feature adjustment, installer set-up and firmware update using USB
- LFE Balanced XLR and unbalanced RCA Inputs
- Stereo RCA line level inputs
- Phase switch (0-180 degrees)
- 12 V trigger and auto signal sensing with timer control
- 4 x pre-set equalisation optimised for music, movie, flat and impact with customisation through ‘SubConnect’ Applet
- Robust metal mesh grille on front woofer
- Rigid MDF cabinet construction with durable vinyl finish
Each little bass-engine is generously specified with custom installation in mind, providing versatile input and control options including RS232 and a dedicated ‘SubConnect’ PC applet via a wired USB interface.
The compact rigid 18 mm MDF cubic cabinets with regular 25.5 cm dimensions incorporate no fewer than three robust, similarly sized 8″ C-CAM drivers. Each system array comprises an active high-excursion drive unit powered and trimmed by potent DSP-tuned amplification, together with twin side-mounted ABRs (Auxiliary Bass Radiators).
Specifications
System Format
Active sub-woofer system – twin ABR. 18 mm MDF cabinet (CARB2 approved)
Lower Frequency Limit
35 Hz (-6 dB)
Amplifier Output
350 W RMS @ < 1% THD+N
Maximum SPL
105.8 dBA
Amplifier Classification
Class D amplifier with Switch mode power supply (SMPSU)
Inputs
Stereo RCA LFE (RCA) LFE Balanced (XLR)
EQ
Flat/ Music/ Movie/ Impact
Phase Control
0 & 180 degrees
Auto Sensing
LFE Input <2mV Auto wireless audio input signal detection Auto Standby After approximately 15 minutes if no signal sensed Wireless audio source turned off Drive Unit Complement 1 x 8″ (200 mm) C-CAM long throw driver, 2 x 8″ (200 mm) ABR Input Impedance > 20 ohms
Mains Input Voltage
110 – 120 Vac / 220 – 240 Vac 50/60 Hz (Manual Switch selection)
Dimensions (Including Feet (H x W x D))
270 x 260 x 276 mm (105/8 x 101/4 x 107/8″)
Trigger Input
5 – 12 V via 3.5mm mono mini-jack socket
Power Consumption
Standby: < 0.5 W (ErP approved) Typical Idle: < 10 W Max Rated: 400 W
Weight (unpacked)
9.52 kg (21 lb)
Sold As
Single Unit
Additional information
| Brand | Monitor Audio |
|---|---|
| Speaker Type | Floorstanding |