Engineered for control in operation, bass quality and concealment in-room, the compact CW10 cube will add explosive bass frequencies to music and AV systems.
Monitor Audio CW10 Subwoofer
The new CW10 places all the power in the hands of installer and client. Engineered for control in operation, bass quality and concealment in-room, the compact CW10 cube will add explosive bass frequencies to music and AV systems when tucked behind furniture on room boundaries.
Each little bass-engine is generously specified with custom installation in mind, providing versatile input and control options including RS232 and a dedicated ‘SubConnect’ PC applet via a wired USB interface.
The compact rigid 18 mm MDF cubic cabinets with regular 30 cm dimensions incorporate no fewer than three robust, similarly sized 10″ C-CAM drivers. Each system array comprises an active high-excursion drive unit powered and trimmed by potent DSP-tuned amplification, together with twin side-mounted ABRs (Auxiliary Bass Radiators).
This product is now available to use with home theatre design software.
Active sub-woofer system – twin ABR. 18 mm MDF cabinet (CARB2 approved)
Lower Frequency Limit
32 Hz (-6 dB)
400 W RMS @ < 1% THD+N
Class D amplifier with Switch mode power supply (SMPSU)
Stereo RCA LFE (RCA) LFE Balanced (XLR)
Flat/ Music/ Movie/ Impact
0 & 180 degrees
LFE Input <2mV Auto wireless audio input signal detection Auto Standby After approximately 15 minutes if no signal sensed Wireless audio source turned off Drive Unit Complement 1 x 10″ (250 mm) C-CAM long throw driver, 2 x 10″ (250 mm) ABR Input Impedance > 20 ohms
Mains Input Voltage
110 – 120 Vac / 220 – 240 Vac 50/60Hz (Manual Switch selection)
Dimensions (Including Feet (H x W x D))
315 x 305 x 320 mm (123/8 x 12 x 125/8″)
5 – 12 V via 3.5 mm mono mini-jack socket
Standby: < 0.5 W (ErP approved) Typical Idle: < 10 W Max Rated: 400 W
12.64 kg (27 lb 12 oz)