Wireless microphone with excellent range and sound quality. The transmitter uses an integrated audio and transmission management solution on a single chip, based on a DSP audio processor and PLL frequency control. Compared to systems integrating discrete components, the stability and reliability of this system is far superior.
Fonestar SONAIR-PRO-2MP Dual UHF – Hand-Held Wireless and Belt-Pack Microphone
€359
In stock
In stock
Description
- Transmission without interference
- Reception with dual antenna
- Great vocal sound
- Long reach
- Long battery life
- Transmission without interference
- Reception with dual antenna
- Great vocal sound
- Long reach
- Long battery life
- Dual UHF hand-held wireless and belt-pack microphone, with ID Pilot and Diversity receiver
- Wireless microphone with superior sound, stable operation and excellent interference behaviour.
- The microphone integrates the ID Pilot function which pairs the receiver and transmitter with a unique 16-bit code, preventing other microphones from interfering even on the same frequency. In addition, the diversity reception with two antennas ensures the best RF reception.
- The display on the microphone and on the receiver easily informs about frequency and battery status. Facilitating the control of microphones.
- The transmitter uses an integrated audio and transmission management solution on a single chip, with frequency selection and efficient power management to maximise battery life. FM modulation technology with high sound quality.
- The receiver and microphone channels are quickly synchronised with the IR synchronisation function.
- UHF frequency range with selectable transmission channels.
- Receiver with colour display and low noise balanced and unbalanced output for easy connection.
- Composed of a receiver, a hand-held microphone and 1 belt-pack transmitter with clip-on microphone.
- Suitable for events with portable microphones, such as presentations, lectures, singers, events, performances, etc.
- Dual UHF hand-held wireless and belt-pack microphone, with ID Pilot and Diversity receiver
- Wireless microphone with superior sound, stable operation and excellent interference behaviour.
- The microphone integrates the ID Pilot function which pairs the receiver and transmitter with a unique 16-bit code, preventing other microphones from interfering even on the same frequency. In addition, the diversity reception with two antennas ensures the best RF reception.
- The display on the microphone and on the receiver easily informs about frequency and battery status. Facilitating the control of microphones.
- The transmitter uses an integrated audio and transmission management solution on a single chip, with frequency selection and efficient power management to maximise battery life. FM modulation technology with high sound quality.
- The receiver and microphone channels are quickly synchronised with the IR synchronisation function.
- UHF frequency range with selectable transmission channels.
- Receiver with colour display and low noise balanced and unbalanced output for easy connection.
- Composed of a receiver, a hand-held microphone and 1 belt-pack transmitter with clip-on microphone.
- Suitable for events with portable microphones, such as presentations, lectures, singers, events, performances, etc.
Specs
| FEATURES: | Dual hand-held and belt-pack wireless microphone Receiver with colour display of information; transmission channel, battery level in microphone, etc. Radio frequency signal and audio signal indicator. ID Pilot function 16 bit pairing code to avoid interference. Diversity reception with antennas. Transmission of the receiver channel to the microphone with SYNC IR. Selectable channels. Transmission distance greater than 50 m. Great vocal quality. Maximum 7 – 8 microphones /receivers operating at the same time on different channels. |
| FREQUENCIES: | Range 640-690 MHz 500 channels |
| POWER: | 30 mW |
| RESPONSE: | 30-20,000 Hz (+/- 2 dB) |
| S/N RATIO: | > 96 dB |
| OUTPUTS: | Audio: 2 balanced, XLR, 0 ~ 250 mV, 600 Ω 1 unbalanced mix, 6.3 mm jack, 0 ~ 250 mV, 1 KΩ |
| INPUTS: | 2 antennas, TNC female, 50 Ω. With 9 V DC output for power supply of antenna amplifiers |
| RECEIVER: | Receiving sensitivity: -95 dBm Distortion: < 0.3% Latency: < 3 ms |
| MICROPHONES: | 1 hand-held wireless microphones with dynamic unidirectional capsule 1 belt-pack wireless microphone with clip-on microphone 3-pin XLR mini input connector Harmonic radiation: < -50 dBc Battery life (alkaline): 8 – 10 hours approx. |
| POWER SUPPLY: | Receiver: 12 V DC, 1 A with adapter included Transmitter microphone: 2 x AA batteries. Supports rechargeable batteries. |
| DIMENSIONS: | Receiver: 420 x 45 x 180 mm depth |
| WEIGHT: | 1.6 kg |
| ACCESSORIES: | 2 antennas TNC 6.3 mm mono jack cable, 1m Anti-spin ring Power adapter Microphone batteries Mounts for assembling in 1 U 19″ rack |
| COMPATIBILITY: | FCM-850-MC3: Tie-clip microphone FCM-970-MC3: Head-worn microphone FCM-660-MC3: Head-worn microphone |
Specs
| FEATURES: | Dual hand-held and belt-pack wireless microphone Receiver with colour display of information; transmission channel, battery level in microphone, etc. Radio frequency signal and audio signal indicator. ID Pilot function 16 bit pairing code to avoid interference. Diversity reception with antennas. Transmission of the receiver channel to the microphone with SYNC IR. Selectable channels. Transmission distance greater than 50 m. Great vocal quality. Maximum 7 – 8 microphones/receivers operating at the same time on different channels. |
| FREQUENCIES: | Range 640-690 MHz 500 channels |
| POWER: | 30 mW |
| RESPONSE: | 30-20,000 Hz (+/- 2 dB) |
| S/N RATIO: | > 96 dB |
| OUTPUTS: | Audio: 2 balanced, XLR, 0 ~ 250 mV, 600 Ω 1 unbalanced mix, 6.3 mm jack, 0 ~ 250 mV, 1 KΩ |
| INPUTS: | 2 antennas, TNC female, 50 Ω. With 9 V DC output for power supply of antenna amplifiers |
| RECEIVER: | Receiving sensitivity: -95 dBm Distortion: < 0.3% Latency: < 3 ms |
| MICROPHONES: | 1 hand-held wireless microphones with dynamic unidirectional capsule 1 belt-pack wireless microphone with clip-on microphone 3-pin XLR mini input connector Harmonic radiation: < -50 dBc Battery life (alkaline): 8 – 10 hours approx. |
| POWER SUPPLY: | Receiver: 12 V DC, 1 A with adapter included Transmitter microphone: 2 x AA batteries. Supports rechargeable batteries. |
| DIMENSIONS: | Receiver: 420 x 45 x 180 mm depth |
| WEIGHT: | 1.6 kg |
| ACCESSORIES: | 2 antennas TNC 6.3 mm mono jack cable, 1m Anti-spin ring Power adapter Microphone batteries Mounts for assembling in 1 U 19″ rack |
| COMPATIBILITY: | FCM-850-MC3: Tie-clip microphone FCM-970-MC3: Head-worn microphone FCM-660-MC3: Head-worn microphone |
Additional information
| Brand | Fonestar |
|---|---|
| Microphone Type | |
| Microphone Features | Condenser Microphone, Wireless |