Audac Q4


Call for availability

Audac Professional Power Amplifier 4 X 600W @ 4 Ohm

Call for availability

SKU: Q4 Categories: , Tag:


Audac Q4 Power Amplifier 4 X 600W@4 Ohm – Doneo Malta


  • Professional Class H Power Amplifier
  • Designed to provide high rich power output
  • Replaceable dust filter
  • Equiped with original Neutrik connectors
  • Four channel amplifier
  • Protection circuit: DC, Clip and Overheat
  • Four channel volume control


  • Conference spaces
  • Retail stores
  • Hotels
  • Restaurants
  • Multimedia projects
  • Churches

The AUDAC Q series are 4 channel power amplifiers, suitable for the most common low impedance high power multi-room systems. These amplifiers are built as 4 channel amplifiers with possible bridge function. The amplifiers are fitted with a multipurpose protection circuit, which detects DC malfunction, short circuit, overheating, signal overload and signal limiting. The Q series are designed as no-nonsense amplifiers, with only the necessary controls and connectors. This creates a great simplicity in use and installation. The AUDAC Q4 delivers an output power of 4 x 400 Watt at 8 Ohm and 4 x 600 Watt at 4 Ohm. In bridge mode it can deliver a power of 2 x 1200 Watt at 8 Ohm. On the front of the Q4, there’s for each channel a volume control, a signal LED to check if there is a signal present on the appropriate channel, a clip LED to indicate when the signal is too strong and should be reduced and a protection LED to warn when the protection circuit kicks in, to avoid damage to the amplifier. Each channel has its own separate signal input on a balanced XLR connector and an output on speakon connector. The Q4 can be set in stereo or bridge mode for channels 1 + 2 and channels 3 + 4, using the appropriate switches. A ground-lift switch is also provided to avoid humming sound produced by ground loops. All models from this serie have the 2 HE 19” rack mount chassis.

RMS Power @ 8 Ohm 4 x 400 W
RMS Power @ 4 Ohm 4 x 600 W
RMS Power @ 8 Ohm bridged 2 x 1200 W
Input impedance 20 Kohm balanced
10 Kohm unbalanced
Input sense 0.775 V
Frequency response -3dB 20 Hz – 20 kHz
THD+N by 1kHz < 0,05% @ 8 Ohm
Signal to noise ratio > 93 dB
Slew rate 40 V / µSec
Power supply 240 V AC / 50-60 Hz
Damping Factor > 400
Cross talk > 70 dB @ 8 Ohm @ 1 kHz
Protection DC short circuit
Over load
Signal limiting
Dimensions (Width x Height x Depth) 482 x 88 x 460 mm
Weight net 28 Kg
Mounting 19”
Unit height 2 HE
Construction Steel
Colour Black

Additional information



Amplifier Connectivity


This website uses cookies and third party services. Ok