Audac professional Four Channel 100V Power Ampifier 4 X 120 Watt, Class-D, 4Ohms low impedance, High pass filter switch.
Call for availability
Call for availabilitySEND EMAIL QUERY
Audac CAP412 4 Channel 100V Power Ampifier – Doneo Malta
The CAP412 is a professional four channel 100V power amplifier which is capable of providing 120 Watt to each of the four separate output channels.
This creates a great flexibility and new possibilities for installed multi-zone audio distribution systems. It is designed as a no-nonsense amplifier with only the necessary controls and connections which creates great simplicity in use and installation. Every output channel contains different power taps to be used in 100 Volt, 70 Volt and even 4 Ohm low impedance applications and the input signal connections are performed using balanced XLR connectors, allowing link through to other amplifiers. Besides all the desired connection possibilities, the CAP412 also offers a gain control potentiometer and a high-pass filter switch (400Hz) on the back of the unit.
A built-in multipurpose protection circuit protects against DC malfunction, short circuit, overheating, overload, and limits the signal when necessary. This all is built into a double rack space, steel 19” housing.
|RMS Power||4 x 120 W|
|Signal / Noise||> 100 dB|
|THD+N (@ 1 kHz)||< 0.3% (1/2 Rated Power)|
|Crosstalk (@ 1 kHz)||< 80 dB|
|Common mode rejection ratio||70 dB|
|Protection||DC Short circuit|
|Cooling||Temperature controlled FAN|
|Operating temperature||0° ~ 40° @ 95% Humidity|
|Frequency||Response (± 3 dB)||50 Hz – 22 kHz|
|Source||100 ~ 240 V AC / 50 ~ 60 Hz|
|Inputs||Sensitivity (1W/1m)||-0.5 dB ~ 10.5 dB|
|Impedance||10 kΩ balanced|
|Connector||XLR female with Male Linkthrough|
|Outputs||Voltage / Impedance||100 V / 83 Ω|
|70 V / 42 Ω|
|Connector||4-pin Euro Terminal Block (Pitch – 5.08 mm)|
|Dimensions||482 x 88 x 420 mm (W x H x D)|
|Unit height||2 HE|